ĻĹ2019

Central Association recruitment!
Guteng Environmental Protection Network > News > Text

Create a one-stop service expert mist pool humidification system jumps into the market dark horse

来源:中国环保在线 作者: 阅读:17987 网友评论0 Updated: 2017-04-07 14:37 Source: China Environmental Protection Online Author: Read: 17987 2010 0 comments

At the 24th South China International Printing Industry Expo, which was held on March 1st to March 3rd, 2017, the high-pressure 1-fluid AirULM and 2-fluid AirAKI humidification systems in the mist pool were favored and became the focus of the audience. It is reported that through two humidification systems, the fog pool has already made a significant contribution to the improvement of humidity in the entire industry.

Create a one-stop service expert mist pool humidification system jumps into the market dark horse

In 1979, the mist pond successfully developed the AKIJet nozzle that can produce fine mist like nature in the natural world, obtained a world patent, and began selling humidifiers using this nozzle. Since then, after more than ten years of exploration and research, the company launched an industrial air conditioning humidification system in 1990, creating the world's first one-stop humidification service from field survey to post-maintenance, and has accumulated nearly 30 years of rich experience.

According to reports, industrial humidifiers are divided into gasification, steam, ultrasonic, centrifugal, spray and other types. The mist pool uses a special spray nozzle to spray water directly into particles.

The spray method in the mist pool has unique advantages: Compared with gasification humidification, it can quickly respond to temperature requirements and control humidity more accurately; compared with ordinary steam humidification, the energy cost is less than 1/5, and it has absolute energy saving advantages. ; At the same time, there are no problems such as ultrasonic and centrifugal degradation over time and frequent maintenance.

The real scene of the pond in the twenty-fourth South China International Printing Industry Expo

At the 24th South China International Printing Industry Expo held from March 1st to 3rd, Wuchi brought its latest products and technologies to the stage. The company's high-pressure 1-fluid AirULM and 2-fluid AirAKI humidification systems became dazzling stars at the exhibition site.

High pressure 1 fluid humidification system AirULM (LYOMer-C) product picture

High pressure 1 fluid humidification system AirULM (LYOMer-D) product picture

High pressure 1 fluid humidification system AirULM

According to the introduction of the fog pool, AirULM is a high-pressure, 1-fluid humidification system suitable for large space and low cost. It consists of two parts: a humidification control system and a water supply system. Because no air compressor is needed, the power consumption is low and the operating cost low. AirULM's powerful humidifying spray unit "LYOMer-C", which emits about 19 liters per hour, can spray uniform and fine mists. In the space above the ground 5m above the ceiling, these fine mists can be completely vaporized in the air, without wet production. Equipment and products.

AirULM system composition diagram

AirULM is equipped with four control systems for controlling 1 to 4 channels, which automatically operate according to the humidity sensor. The water supply system is composed of a high-pressure pump component that generates power and a water purifier that can remove impurities in the water: the power consumption of the water pump component is 0.75kw, large capacity and low cost. The pure water machine removes impurities and ions in the water, eliminating clogging and precipitation of ions in the spray module. Maintenance only requires regular replacement of the filter element and the reverse osmosis membrane of the water purifier, saving time and effort.

2 fluid dry mist humidification system AirAKI product physical map

2 fluid dry mist humidification system AirAKI

AirAKI is a kind of "dry fog" humidification system that can produce more detailed than AirULM. It is suitable for spaces with low ceilings or equipment-intensive sites.

AirAKI system composition diagram

According to the data, AirAKI is composed of 3 systems: humidification control system, air pressure system and water supply system. The connection method and installation of each system are very simple and suitable for any site. Each humidifier can release a maximum of 9.6 liters of dry mist in one hour, which can cover all corners of the factory. Can strictly control humidity to achieve accurate humidification. The spray response is very fast and there is no water leakage when closed.

The power source for making dry mist, the air compressor, consists of various filter elements, which can effectively remove impurities and ions in water. The use of a pure water machine reduces the maintenance of spray components and prevents the formation of dust due to ion precipitation which can cause malfunctions to the product and production machinery.

Specific to the field of printing industry, the introduction of the mist pool, the high-pressure 1-fluid AirULM and 2-fluid AirAKI humidification systems have three unique advantages: First, reduce the defect rate. It is easy to generate static electricity in a dry environment. Static electricity can cause defective products. Proper humidity can effectively reduce the generation of static electricity and reduce the defect rate caused by static electricity. Second, anti-explosion. A large amount of flammable and explosive dangerous goods may need to be stored in the factory workshop. If it encounters a static electrode, it is likely to explode. Increasing humidity and reducing static electricity can effectively prevent this danger. Third, dilute the odor. Humidification indoors can effectively dilute various odors in closed workshops and effectively improve the working environment of workshop workers. And both types of humidification systems have the advantages of low operating costs and high efficiency, which have an important role and significance for the healthy and sustainable development of the printing industry.

In addition, the high-pressure 1-fluid AirULM and 2-fluid AirAKI have also been widely used in plastics, chemistry, environmental protection, agriculture, food and other fields. The mist pool has already made a significant contribution to the improvement of humidity in the entire industry. Wuchi said that in order to provide customers with peace of mind, the company will continue to strive for perfection and progressiveness in the future development process.

Disclaimer : This article is reproduced for the purpose of passing more information. If any source is wrongly marked or violates your legal rights, please contact the author with the proof of ownership, and we will correct and delete it in time. Thank you.

Use WeChat Scan to Add Guten Environmental Protection Network

Comments on " Building a one-stop service expert mist pool humidification system jumps into the market dark horse " review
nickname: Verification code:

Netizen comments are for their personal opinions only, and do not indicate that Gutenberg agrees with their views or confirms their descriptions.

Soil Pollution Control Action Plan
Soil Pollution Control Action Plan

On May 31, after undergoing extensive solicitation of opinions, full investigation and demonstration, repeated revision and improvement ...

2015 China Water Treatment Engineering Salon Phase 2
2015 China Water Treatment Engineering Salon Phase 2

The “2015…” will be held on September 11, 2015 (Friday) at the Shangshan Huizhou Club in Beijing ...

2015 China Water Treatment Engineering Salon
2015 China Water Treatment Engineering Salon

In order to better understand the current Chinese water treatment industry, strengthen the top among the industry's top ...